Our Equipment

Advantages in Using the VELTRUP Roto-Fan® System

  • The system removes tough, hard or brittle encrustations with high cleaning speeds (e.g. bitumen, latex, bauxite, coke).
  • Even in totally blocked pipes extremely high cleaning rates are achieved.
  • Roto fan treated pipes are absolutely clean without any strips being left.
  • The system can clean up to 600 meters of pipes on one shot (depending on hardness and volume of incrustations).
  • The system can pass more than 50 elbows of 90 degrees.
  • The cleaning quality is independent from the pipe.
  • The cleaning quantity is Independent from the pipe (depending on ID and hardness volume of incrustations and materials of the pipe e.g. PVC,HDPE,SS, cast iron,stoneware,concrete).
  • The cleaning quality is independent from the material of the pipe (e.g. PVC, HDPE, SS, cast iron, stoneware, concrete).
  • All cleaning parameters such as: rotating speed, forward speed, pressure etc., are remotely controlled.
  • The productivity of the personnel and the yield per day is enormously enlarged since there is no hard work involved and no breaks of operators cut the cleaning capacity. Continuous work in low or high temperature environment is no problem.
  • The space required for entering the pipe to be cleaned is fantastically small.
  • If necessary, the system is able to follow pipe junctions according to the requirement of the installed pipe system.
  • Pipes on pipe bridges can be cleaned from the ground and insitu. They do not need to get dismantled.
  • Since the forward speed as well as the cutting speed is remotely and mechanically controlled the encrustation can be cut down to a defined grain size so that this grain is flushed out of the pipe at once after it is generated.
  • Blockages created by big lumps are practically impossible.